Pairing with MCP50

Owned by Matt Sneller (Deactivated)
Last updated: Oct 29, 2015
2 min read

This procedure will only work on an MCP50 with an AZIO BTDV-201 Bluetooth USB dongle.

Step-by-step guide

  1. Connect the AZIO BTDV-201 to the USB port on your MCP50
  2. On the MCP50 home Screen, select the right arrow and tap Settings - Bluetooth tab and open the MCP50's keyboard.
     
  3. On your Android Device, go to Setting - Connections - Bluetooth 
    (info) Some devices will have a different path to bluetooth settings
  4. Enable Bluetooth
  5. You should see the MCP50 in the Available devices list.
    1. If you have several MCP50's, reference the device name with the Bluetooth ID shown on the MCP50.
       
  6. On your Andriod Device, tap MCP50 that you wish to pair with.
  7. Enter the password shown in the MCP50's Bluetooth Password field on your device.
     
  8. In some cases, the MCP50 may prompt for a Bluetooth password when connecting to a Android device. If prompted enter 0000 and tap OK.
     
  9. You should now see a Paired status on your Android device.
     

If you need to re-pair with the MCP after the initial paring is complete, you'll need to enter the MCP50's Bluetooth Password or 0000

Setting up the Cyan Engine for Bluetooth connections

  1. Go to Cyan engine settings, start the Cyan Engine and click Menu - Settings. 
    (info) Some devices have a hardware menu button in the lower left corner of the device. If you device does not, the menu button will be located in the upper right corner of the screen.

  2. Scroll down to Communication Mode and select Bluetooth
     
  3. Select MCP Bluetooth Device Name and enter MCP50
     
  4. Select the hardware back button or the Cyan icon at the top to save and exit settings.

 

Have questions? Email support@bluedotsolutions.com