Setting Up Pocket MP2 Plus client

There are two main components of Pocket mp2 Plus, the engine and the application. The engine is installed on the device, the application is downloaded from the MP2 Mobile Products server on startup.

Engine Config

1. Start Pocket mp2 Plus on the device. (Start - Programs)
   1. Note: The engine version is shown on this screen
      
2. Select Setup
3. Enter '12345' for the admin password
4. Select Edit IP Address 
5. Select any exiting IP addresses and click Delete
6. Enter the IP address of your MP2 Mobile Products Server and select Add, then select OK
    
7. Port should be 3973
8. Synch Every should be 5 Secs.
9. Data Directory should be Temp
10. Sync Output as should be XML
     
11. Select OK and select Enter on the next screen to start the application.

Initial Admin Sync

Admin Sync - Downloads lookup data like users, RFO/RFF/Solution codes
User Sync  - Downloads Work Order data, Equipment, History, Parts, etc. 

1. On the Login Screen, enter the default Administrator credentials. 
   1. User: ADMIN
   2. Password: 12345
   3. Note: the application version is displayed under the password field
2. Once logged in, select Synchronize
   1. Depending on how much data you have in mp2, the sync could take from 2 to 15 minutes to complete. We recommend the device be place in a cradle, with power, until the sync has completed.
3. Once the sync has completed, select Exit to Return to the Login screen.

Users are now able to login with their MP2 username and password, sync and start using the application. 

Pocket MP2 Plus is highly configurable, please see the Advanced Configuration page for details.