Pairing with MCP100/200

This procedure will only work on an MCP100/200 with a Bluetooth dongle provided by Blue Dot Solutions.

Before any devices can successfully sync through an MCP using Extended Productivity, the customer must complete two important steps:

Subscribe and accept associated terms and conditions for Extended Productivity via Omnitracs Customer Portal
Configure Operational Profile to specify which groups of MCP UA #’s you would like the Extended Productivity application applied to

Step-by-step guide

Connect the Bluetooth dongle on your MCP (DB25 Null Modem cable -> MCP DB25 Connector)
On your Android Device, go to Setting - Connections - Bluetooth
Some devices will have a different path to bluetooth settings
Enable Bluetooth
You should see the CYAN bluetooth device in the Available devices list.
1. If you have several MCP's, reference the CYAN label on the Bluetooth device. The label will be the word "CYAN" followed by a number
On your Andriod Device, tap Bluetooth device that you wish to pair with.
If prompted for a password, enter 1234 or 0000
You should now see a Paired status on your Android device.

Setting up the Cyan Engine for Bluetooth connections

Go to Cyan engine settings, start the Cyan Engine and click Menu - Settings - Omnitracs (MCP).
Some devices have a hardware menu button in the lower left corner of the device. If you device does not, the menu button will be located in the upper right corner of the screen.
Scroll down to Communication Mode and select Bluetooth
Select MCP Bluetooth Device Name and enter CYAN or the full Bluetooth device name
Select the hardware back button or the Cyan icon at the top to save and exit settings.